OVERVIEW
Device Data Settings, or DDS, indicate the frequency that the system records and transmits the location of an asset.
The default for the in-vehicle tracking units is to record once every 2 minutes and transmit the data back to the Fleet Complete system every 6 minutes. For the AT-1000 Asset Tracker, the default setting takes a position once every 24 hours when stationary and not attached to a battery or power source and every 4 hours when connected to a power source and/or in motion.
ACCESS DEVICE DATA SETTINGS
- Log in to Fleet Complete
- From the Tracking screen, click the Menu Bar icon on the top left-hand corner to access the Navigation Panel
- Click the Manage menu item
- Select Devices
ADD A NEW DEVICE DATA SETTING PARAMETER FOR IN-VEHICLE TRACKING
- Complete steps 1-4 from Access Device Data Settings
- Click the Add button
- Click In-Vehicle Tracking for MGS devices
- Click Proceed
- Type the Description of the new Device Data Setting
- Type the Recording Frequency parameter (Minimum of 30 seconds
- Type the Transmission Frequency parameter (Minimum of 1 Minute)
- Drag the slider bar to the right to disable Data Conservation mode
- Type the Transmit Interval when Data Conservation Mode is disabled
- Click the Save button
Note: To avoid service overages, use caution when modifying the settings or creating new ones.
ADD A NEW DEVICE DATA SETTING PARAMETER FOR AN ASSET TRACKER AT AT-1000
- Complete steps 1-4 from Access Device Data Settings
- Click the Add button
- Click AT-1000 Asset Tag
- Click Proceed
- Type the Description of the new Device Data Settings
- Type the Stationary Transmit Interval parameters if External Power Disconnected (Minimum of 4 hours and Maximum of 24 hours)
- Type the Stationary Transmit Interval parameters if External Power Connected (Minimum of 60 Minutes and Maximum of 24 hours)
- Drag the slider bar to the right to Enable Motion Detection.
- Type the Moving Transmit Interval parameters if External Power Disconnected (Minimum of 30 Minutes and Maximum of 24 hours)
- Type the Moving Transmit Interval parameters if External Power Connected (Minimum of 30 Minutes and Maximum of 24 hours)
- Click the Save button
Note: To avoid service overages, use caution when modifying the settings or creating new ones.
TO LEARN MORE ABOUT DEVICE DATA SETTINGS
To learn more about Device Data Settings, click the Help button located in the top right-hand corner of the tracking screen and perform a keyword search.
Comments
0 comments
Please sign in to leave a comment.